Launch X431 Diagnostic tool

This is a tutorial on using Launch X431 IMMO Plus to program BMW CAS3+ key adding by OBD. The procedure also applies to X431 IMMO Elite . Procedure 1. Backup Key Info IMMO >> BMW Connect the diagnostic connector and X431 IMMO Plus Programmer at the same time. Press "OK". Anti-theft key matching >> CAS3/CAS3+ IMMO >> Key operation >> Key data operation >> Backup key data Use the function to backup CAS key data. Remarks: it is suggested that the CAS original key data should be backed up with the function before key learning. Press "OK". Reading key data... please wait! Take the key out form the ignition switch! If the key is a smart one, please put it outside the vehicle. Please click "OK" directly if there is no key in the ignition switch. Press "Backup" to save the file. Key information backup successful! 2. Add Key Press "Key learning". The current CAS type is an encrypted version. Are all keys lost? No ...

This is a tutorial on how to use Launch X431 IMMO Plus to program Ford engine module replacement. Besides, the X431 IMMO Plus programming tool also supports anti-theft module replacement of BMW, Mercedes-Benz, VW/Audi, Honda, Nissan, Hyundai, etc. Read this article carefully to learn how to do it. Procedure Connect X431 IMMO Plus to car OBD. IMMO >> Ford >> Anti-theft system detection >> Automatically search Set the ignition switch to ON(Position II). Please confirm VIN and VIN code, and press "Yes". Immobilizer system function(expert edition) >> PATS(Passive Anti-Theft System) Functions Set the ignition switch to on. Module initialization >> PCM(powertrain control module) Set the ignition switch to OFF(Position 0). Operation in progress. Please wait until 100%... Set the ignition switch to ON. Retrieving data for coded access procedure... Please confirm VIN and VIN code, and press "Yes ". Set the ignition switch to OFF(Position 0). P...